Our Products

Productanimation.gif


Pocket Lube

  1. Product Overview
  2. Features
  3. Benefits
  4. Specifications
  5. Accessories
  6. Demo

Product Overview

Easy to use lubrication control system that gives the user the complete picture by recording the bearing noise BEFORE, DURING and AFTER lubrication.

Both Under and Over lubrication can cause bearing damage.  Pocket Lube helps you get it right.

Control lubrication costs by only lubricating when necessary and using the correct amount of lubricant.

Gives the user total control of lubrication!

Features

  • Measures bearing noise before, during and after lubrication
  • Determine optimum lubrication levels
  • Record  and trend lube usage
  • Auto identifies lube points and lube type
  • Easy to follow  routes
  • Record and trend ALL process info.
  • Save readings to RFID tags

Benefits

  • Pocket Lube is a revolutionary new concept that allows users to determine the optimum amount of lubrication to add to bearings. It works by monitoring the bearing noise before, during and after the addition of lubricant.
  • Easy to read display shows bearing noise in bearing damage units (BDUs).
  • Lubrication points and lube type can be automatically identified using RFID tags and readings can be saved to tags for later recall.
  • System records and trends bearing noise and amounts of lubricant used to give full lube history.
  • Saves ANY process readings for later recall and trending on PC.
  • Can be upgraded to Pocket  VibrA full asset management system complete with process data trending, alarming, automatic report generation and graphical display of multiple frequency spectra etc.

Specifications

Size 220 mm x 95mm x 45mm RFID (optional)

13.56 MHz
Weight 500g (not including accelerometer) I-Code SL


Environmental RFID data format
Water: MIL-STD-810F, Method 512.4 Stores lube point ID
IP67 sealed against accidental immersion Last reading
(1m for 30 min) Lube type etc.
Drop: MIL-STD-810F, Method 516.5, Procedure IV
26 drops from 1.22 m Accelerometer Connection
6 additional drops at -20º Standard 10 pin IP67 connected smart
6 additional drops at 60º accelerometer with built-in ID and sensitivity
Operating: -30º to 65º calibration (nominally 25mV/g)
Storage: -40º to 70º
Humidity: MIL-STD-810F, Method 507.4 Keypad or Touch Screen Operation
Sand & Dust: IP67, MIL-STD-810F, Method 510.4, Stylus free collection of vibration data using
Procedures I & II single key press or touching screen

Battery life Displayed Lube Units
Typically 20 hours operating time depending Number of pumps added Litres, cc's,
on backlight usage Fluid Ounces or user defined

Power Supply
 Options
Rechargeable battery (charger included)
 Carrying case with neck strap, Stylus lanyard,

Docking Station, AA battery module
Displayed Units
  
Bearing noise in BDU (bearing damage units)
  
100 BDU - 1g RMS

 

Accessories

  • Curly cable (1.5m extended) (C307-104)
  • Straight cable 1.5m (C307-105)
  • Straight cable 5m (C307-106)
  • AA dry cell power boot module Nomad (C307-213)
  • Nomad carry case with neck strap and belt clip (C307-214)
  • Stylus lanyard (C307-204)
  • Rechargeable power boot Nomad (C307-212)
  • 12 volt in-vehicle charger Nomad (C307-215)
  • Stylus (Nomad) (C307-216)
  • Docking cradle (Nomad) (C307-217)
  • RFID Tags (200) (C307-218)
  • C-Cubed "smart" Accelerometer & Magnet (Standard) (C307-100)

PocketLubeThese are some typical screens that the user might see when using the unit. Extensive use is made of icons for function selection and both touch screen and keyboard entry are simultaneously available. Data is very easily entered by typically selecting from drop down menus. Zooming into displayed graphs etc is done simply by touching the screen and dragging a zoom box.


Resource Box